The stainless steel coaxial gearboxes proposed by LOVATO can be installed even at presence of one or more corrosive agents, or in the case you need a gearboxes which, thanks to its design, is easy to clean; consequently, the occasional or continuous contact between the finished item and the stainless steel coaxial gearboxes LOVATO will no more be a problem.
In fact, all the external components, included the output shaft, are made of stainless steel.

Differently from a traditional gearboxes, the stainless steel coaxial gearboxes LOVATO have plain and uniform surfaces in order to avoid the deposit of material, are not painted to avoid the possibility of damage of the paint and contamination of the final item, the technical data are etched directly onto the motor body in order not to have an area of bacterial proliferation, certainly created by a common nameplates.

The various options available make the stainless steel coaxial gearboxes LOVATO flexible even for the most exigent customer.
Wide range of ratios (1/1.30 - 1/61.88), special lubrificants (compatible with occasional contact with food or for low temperatures), kits to increase the IP protection level and the possibility to be coupled with to LOVATO's stainless steel motors, are only some of the available options.

The possibility of being predisposed for motor connection, both IEC and NEMA and metrical and inches output flanges and shafts, lets know why LOVATO's stainless steel coaxial gearboxes are destined to a worldwide diffusion.

LOVATO can modify the stainless steel coaxial gearboxes according to the customer's necessities.

other photos